Mebay DC102D Synchronising Paralleling Load Sharing Auto Mains (Utility) Failure Amf ATS Generator Controller Control Module Replace Dse8620 Hgm9510 Hgm9520

• Type: Piezoresistive
• Output Signal Type: Analog Output
• Measuring Shaft Quantities: Single
• Accuracy Grade: 0.2G
• IP Rating: IP44
• Certification: ISO
• Model NO.: DC102D
• Customized: Customized
• Color: Silver White
• Weight: 2kg
• Package: Carton Box
• Warranty: 1 Year
• Stock: Yes
• Size: Standard Size
• Working Voltage: DC8V----36V Continuous
• Transport Package: Netrual Carton Box
• Specification: aluminum
• Trademark: Yokden
• Origin: Chongqing
• HS Code: 8503009090
• Production Capacity: 50000/Month

Product Description

Mebay DC102D Synchronising Load Sharing Auto Mains (Utility) Failure AMF ATS Generator Controller Control Module Replace DSE8620 HGM9510 HGM9520

DC100D is designed for manual/auto parallel system generators with similar or different capacity. The gen set parallel controller utilizing the GOV (Engine Speed Governor) and AVR (Automatic Voltage Regulator) control function. Multiple working modes can be selected, such as genset fixed active power, reactive power/power factor output, mains peak lopping and uninterruptedly restore to mains supply.

 

Advatanges

1. 4.3 inches screen, 5 languages available for choice.

 

2. USB Port, RS485 communication port and Standard CAN communication port, built-in J1939 protocol,

 

3. Real time clock, maintenance countdown function, fault record function and battery charging control function

 

4. 8 relay's output, 8 switches input and 5 sensor simulation input connectors

Advantages

5. Collects and shows 3-phase voltage, current, power parameter and frequency of mains.

 

6. For mains, controller has over voltage, under voltage, over frequency, under frequency ,loss of phase and phase sequence wrong detection functions; For generator, controller has over voltage, under voltage, over frequency, under frequency, over current, over power, reverse power, loss of phase, phase sequence wrong detection functions.

 

7. Synchronization parameters:Voltage Difference Between Mains, Frequency Difference Between Mains, Phase Difference Between Mains, multiple running modes in auto state: AMF (Automatic Mains Failure), Island Mode, Fixed Power, Peak Lopping Mode and Load Takeover Mode.

 

Options	Parameters
Working voltage	DC8V----36V Continuous
Power consumption	Standby:24V:MAX 1W
	Working:24V:MAX 7W
AC Voltage Input	1P2W 30VAC-276VAC (ph-N)
	2P3W 30VAC-276VAC (ph-N)
	3P4W 30VAC-276VAC (ph-N)
Rotate speed sensor Frequency	200-10000Hz
MAX Accumulating Time	99999.9Hours(Min Store time:6min)
Fuel Relay Output	Max 16Amp DC+VE Supply voltage
Start Relay Output	Max 16Amp DC+VE Supply voltage
Programmable Relay output 1	Max 5Amp DC+VE Supply voltage
Programmable Relay output 2	Max 5Amp DC+VE Supply voltage
Programmable Relay output 3	Max 5Amp DC+VE Supply voltage
Programmable Relay output 4	250v/5AMP Non-contact normal close output
Programmable Relay output 5	250v/5AMP Non-contact normal open output
Excitation output	Max 0.9AMP DC+VE supply voltage
Switch value input	Available if connecting with Battery -
Working condition	-25-65ºC
Storage condition	-40-85ºC
Protection Level	IP54:when waterproof rubber gasket is added between controller and its panel
Insulation strength	Apply AC1.5kV voltage between high voltage terminal and low voltage terminal; The leakage current is not more than 3mA within 1min.
Overall dimension	241mm*177mm*45mm
Panel cutout	220mm*160mm
Weight	1Kg