Diesel Generator Control Panel Smartgen Hat530n Engine ATS Controller Hat530n Genset Parts

• Task: Adjust
• Structure: Open-Loop
• Mathematical Model: Linear
• Signal: Continuous
• Function: Automatic Control, Protection, Monitoring, Measurement
• Certification: ISO: 9001
• Model NO.: HAT530N
• Condition: New
• Customized: Non-Customized
• Material: Stainless Steel
• Model: Hat530n
• Used for: Diesel Generator
• Transport Package: Carton Box
• Specification: weight: 1kg
• Trademark: Yokden
• Origin: Chongqing
• HS Code: 903289909
• Production Capacity: 10000PCS/Year

Product Description

Introduction

 

HAT530N ATS controller allows for precision voltage (2-way 3-phase/single phase) measuring and make accurate judgment on abnormal voltage (power lost, over/under voltage, over/under frequency, loss of phase, phase sequence wrong) and control ATS to transfer after the delay has expired. This controller is suitable for NO Breaking ATS and ONE Breaking ATS. When #1 power is abnormal, the controller will send signal to start genset after the "#1 abnormal delay" has expired. "Three remotes" (remote control, remote measurement and remote communication) functions can be implemented with the help of LINK communication port.

 

 

 

PERFORMANCE AND CHARACTERISTICS

 

1.Measure and display 2-way 3-phase Voltage and Frequency

2.Over/under voltage, loss of phase, phase sequence wrong, over/under frequency protection function. As default, phase reverse sequence protection and over/under frequency protection are disabled; however, users can set the protection function as you need.

 

PERFORMANCE AND CHARACTERISTICS

 

3. "1# Master", "Auto/Manual", "Each Backup" and "2# Master" can be set via controller front panel, to realize power supply of 1#
master or 2# master or backup method for each other.

4. Closing output signal can be set as pulse or as continuous output.

5. 2-way N wire isolated design.

6. Auto/Manual mode. In manual mode, ATS transfer can be implemented via panel pushbutton.

 

 

Specification
Operating Voltage	AC170V~277V during AC power L1N1/L2N2 supply.
AC Voltage Input  3P4W (ph-N)  1P2W (ph-N)  2P3W (ph-N)  3P3W (ph-ph)	AC170V~AC277V(ph-N)  AC170V~AC277V (ph-N)  AC170V~AC277V(ph-N)  AC170V~AC277V(ph-ph) (Hardware needs to be customized)
Rated Frequency	50/60Hz
Communication	LINK interface, MODBUS Protocol
Case Dimensions	139mmx120mmx50mm
Working Conditions	Temperature: (-25~+70)°C; Relative humidity: (20~93)%RH
Insulation Strength	Apply AC1.5kV voltage between high voltage terminal and low voltage terminal and the leakage current is not more than 3mA within 1min.